Vape Troubleshooting Guide

Your vaping device requires regular check-ups and maintenance, much like a car needs servicing to run smoothly. Like a car that starts to act up, your vape can also give signs of needing attention, such as producing less vapour or giving off a burnt taste. This guide is designed to help you troubleshoot common issues with your device and will provide tips and advice to ensure it's always in top condition.

In this section, we'll address common vaping issues with simple solutions. From leaks to battery problems, we've compiled a list of troubleshooting issues and fixes for beginners and experienced vapers alike:

If your e-cigarette isn't producing vapour, try the following:

1. Battery: Ensure it's charged and correctly installed.
2. Coil: A burnt or improperly installed coil can prevent vapour production.
3. E-Liquid: Ensure the tank is filled.

Leaking vapes can be messy and frustrating. Here are some potential solutions:

1. Seals: Ensure they are intact and correctly installed, replacing if necessary.
2. Fill Level: Overfilling can cause leaks. Do not exceed the recommended fill level.
3. Storage: Store your device upright when not in use.
4. Airflow: Adjust to balance internal pressure.

Read More: Vape Maintenance and Cleaning Guide

Spitting, popping and gurgling are common issues that can be addressed by checking:

1. Excess E-liquid: Make sure to clear it from the atomiser by cleaning with a cloth.
2. Coil Installation: Ensure proper alignment while installing the coil.
3. Inhalation Technique: Adopt a softer draw technique for inhaling.
4. E-Liquid Collection: Prevent the accumulation of e-liquid on the coil by cleaning with a cloth.
5. Improper Coil Heating: Ensure correct heating of e-liquid with the coil.
6. Coil Oversaturation: Avoid using too much e-liquid, which can lead to oversaturation.
7. Adjust Wattage: Align the wattage with the coil recommendations. Increase in gradually  to find the optimal setting
8. Proper Priming: Use a few drops of e-liquid for priming new coils.
9. Clear Excess Liquid: Use a paper towel to clear excess liquid.
10. Higher VG E-Liquids: Choose thicker e-liquids with higher VG content.
11. Vaping Technique: Use the correct technique for vaping with the device.

Read More: When to Replace Your E-Cigarette

To avoid a burnt taste while vaping, try the following:

1. Change the Coil: Burnt taste is often due to a burnt coil.
2. Coil Priming: Soak new coils with e-liquid before use.
3. E-liquid: Ensure it's not expired and the tank is filled.
4. Power Settings: Match with coil resistance.

One of the most common issues encountered by vapers is the battery. Below are some typical battery problems and solutions:

1. Not Charging: Make sure that the charger is connected correctly. If it still doesn't charge, try using a different charger. If the problem persists, you may need to replace the battery.
2. Not Holding Charge: This is often a sign of an old battery. Depending on usage, replacing your vape batteries every 3-6 months is advisable.
3. Device not Turning on: Check if the external battery is correctly installed. If it is, the battery might be completely drained or defective.

Having trouble getting your vape to 'hit' properly? Try these solutions:

1. Check the Airflow: Ensure the airflow isn't blocked with dirt or debris. Remove by blowing into the device.
2. Check the Coil: A faulty coil can cause draw issues.
3. Pin contacts: Clean the area around the contact points between the vape tank or pod and battery with a cloth.
4. Battery: Ensure it's fully charged

Vape devices can overheat due to various reasons, here are some potential reasons why:

1. Excessive Vaping: Avoid continuous or chain vaping; give your device time to cool down between uses.
2. Incompatible Components: Use only compatible chargers and components recommended for your device to prevent overheating.
3. Poor Airflow: Ensure air vents are clear of obstructions for adequate cooling and to prevent heat build-up.
4. Device Breaks: Incorporate breaks between puffs during vaping sessions to allow the device to cool.
5. Recommended Chargers: Always charge your device with the manufacturer-recommended charger to avoid overheating.
6. Clear Air Vents: Regularly inspect and clean vents to maintain proper airflow and cooling efficiency.

Read More: 10 Things to Avoid When Vaping

If you're considering upgrading to a new vaping device, consider a pod-based one. These devices are easy to use and maintain, and their design is perfect for those who prefer a hassle-free vaping experience. Pod vapes such as the Vuse Pro are designed to be user-friendly and easy to use, with pre-filled or refillable pods that make vaping easy and hassle-free. These devices have fewer parts and more straightforward operation, leaving less room for things to go wrong. 

• Simplified Design: Fewer parts mean fewer chances of malfunctions or maintenance requirements.
• Enclosed Pods: These pods minimise leaks and spills by keeping the e-liquid securely contained.
• Pre-filled Options: With pre-filled e-liquid options available, there's no need for manual refilling, reducing the mess and maintenance involved.
• Lower Power Usage: The reduced power usage decreases the risk of overheating and extends battery life.
• Easy Pod Replacement: The easy pod replacement feature allows for quick changes without the hassle of coil rebuilding or tank cleaning.
• Consistent Performance: The pre-set power levels ensure optimal vapour production without adjustments, leading to consistent performance.
• Compact and Durable: The smaller devices are less prone to damage from drops and wear, making them more compact and durable.
• Integrated Coils: The integrated coils reduce the likelihood of incorrect installations or coil-related issues.

Vuse Customer Care 

If your Vuse Device isn’t working as it should, we always recommend checking out our FAQ's section. If you find you still need help, the Vuse customer care team is always here to help. They can troubleshoot all kinds of common problems to ensure you enjoy the very best vaping experience.